EPE Association: EPE-PEMC 2004 - Topic 05-3: Linear machines and drives

EPE-PEMC 2004 - Topic 05-3: Linear machines and drives
You are here: EPE Documents > 04 - EPE-PEMC Conference Proceedings > EPE-PEMC 2004 - Conference > EPE-PEMC 2004 - Topic 05: ELECTRICAL MACHINES AND ACTUATORS > EPE-PEMC 2004 - Topic 05-3: Linear machines and drives

   [return to parent folder]

   Experimental Verification Of Characteristics Of Attractive Force Of Linear Induction Motor By Power Source Including High Frequency Component
By Kohsuke Yamamoto, Toshimitsu Morizane, Noriyuki Kimura, Katsunori Taniguchi [View]
[Download]

Abstract: We propose a novel maglev system without levitation magnets. This carrier is levitated by using the attractive force of Linear Induction Motor. Then, we propose to use power source including high frequency component to control both traction and levitation. In levitation, the low frequency component controls the force to suspend the bogie and the high frequency component controls the force to keep the required air gap. We verified that the attractive force can be controlled by two frequency components independently by experiment.

   Optimal Trajectory Generation For A Modular Planar Motor Used In Flexible Manufacturing Systems
By L. Szabo, I. A. Viorel, J. B. Dobai, I. E. Szepi [View]
[Download]

Abstract: Modular planar motors can be used in flexible manufacturing systems due to their high forces and accurate positioning capabilities. The desired efficiency of the manufacturing process can be achieved only when the displacements are precisely performed upon a well-planned imposed trajectory. In this paper different trajectory generation possibilities are studied by means of simulation.

   Problems Of Investigation And Development Of Mechatronic Systems With Linear Induction Motors
By Roma Rinkeviciene, Algimantas Poska, Algirdas Smilgevicius [View]
[Download]

Abstract: A theory and development of mechatronic systems with linear induction motors is presented. Method of investigation of LIM operating characteristics corresponding to unquestioning and technically real combination of control and constructive as sets is developed. Dynamic breaking mode is analyzed, the main relationships are derived. A mathematic model in fixed reference frame to investigate dynamic characteristics of linear electric drive is developed. Mechatronic systems with linear induction motors were created and implemented.

EPE-PEMC 2004 - Topic 05-3: Linear machines and drives
You are here: EPE Documents > 04 - EPE-PEMC Conference Proceedings > EPE-PEMC 2004 - Conference > EPE-PEMC 2004 - Topic 05: ELECTRICAL MACHINES AND ACTUATORS > EPE-PEMC 2004 - Topic 05-3: Linear machines and drives
	[return to parent folder]

	Experimental Verification Of Characteristics Of Attractive Force Of Linear Induction Motor By Power Source Including High Frequency Component By Kohsuke Yamamoto, Toshimitsu Morizane, Noriyuki Kimura, Katsunori Taniguchi	[View] [Download]
Abstract: We propose a novel maglev system without levitation magnets. This carrier is levitated by using the attractive force of Linear Induction Motor. Then, we propose to use power source including high frequency component to control both traction and levitation. In levitation, the low frequency component controls the force to suspend the bogie and the high frequency component controls the force to keep the required air gap. We verified that the attractive force can be controlled by two frequency components independently by experiment.

	Optimal Trajectory Generation For A Modular Planar Motor Used In Flexible Manufacturing Systems By L. Szabo, I. A. Viorel, J. B. Dobai, I. E. Szepi	[View] [Download]
Abstract: Modular planar motors can be used in flexible manufacturing systems due to their high forces and accurate positioning capabilities. The desired efficiency of the manufacturing process can be achieved only when the displacements are precisely performed upon a well-planned imposed trajectory. In this paper different trajectory generation possibilities are studied by means of simulation.

	Problems Of Investigation And Development Of Mechatronic Systems With Linear Induction Motors By Roma Rinkeviciene, Algimantas Poska, Algirdas Smilgevicius	[View] [Download]
Abstract: A theory and development of mechatronic systems with linear induction motors is presented. Method of investigation of LIM operating characteristics corresponding to unquestioning and technically real combination of control and constructive as sets is developed. Dynamic breaking mode is analyzed, the main relationships are derived. A mathematic model in fixed reference frame to investigate dynamic characteristics of linear electric drive is developed. Mechatronic systems with linear induction motors were created and implemented.