EPE Association: EPE-PEMC 2004 - Topic 12-8: Modelling and simulation

EPE-PEMC 2004 - Topic 12-8: Modelling and simulation
You are here: EPE Documents > 04 - EPE-PEMC Conference Proceedings > EPE-PEMC 2004 - Conference > EPE-PEMC 2004 - Topic 12: POWER ELECTRONICS IN GENERATION, TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY > EPE-PEMC 2004 - Topic 12-8: Modelling and simulation

   [return to parent folder]

   Analysis Of The Battery Energy Storage Converter Operation
By Andrzej Sikorski, Adam Kuzma [View]
[Download]

Abstract: In the paper the battery energy storage system is presented. Needs and conditions of system application is described. 40 kVA power BES system constructed in Power Electronic and Electrical Drive Department laboratory test is discussed. Additional active current filter with hysteresis and delta modulation controllers laboratory investigations are presented.

   Physical Model Of Superconducting Coil In Real Experiment
By Tomasz Biskup, C. Buhrer, Boguslaw Grzesik, J. Krijgsman, Jaroslaw Michalak, Szymon Pasko, Mariusz Stepien, Marcin Zygmanowski [View]
[Download]

Abstract: Possibility of realization of physical model of a superconducting coil (PhMSC) is described and analyzed in the paper. A physical model can be used to testing Power Conditioning Systems (PCS) instead of the superconducting coil(SC). As a physical model, a serial connection of coil and controlled voltage source is used. By means of controlling of an additional source resistance and inductance of emulated superconducting coil can be changed. Analysis of physical model, simulation and experimental results are presented in the paper. Results described in the paper are part of CRAFT project -HIPOLITY (5th FP).

   Real-Time Simulation Of Doubly Fed Induction Generator For Wind Turbine Applications
By Christian Dufour, Jean Belanger [View]
[Download]

Abstract: This paper describes a real-time simulator of wind turbine generator system suitable for controller design and test. The simulated generator is a grid-connected doubly fed induction machine with vector controlled back-to-back PWM voltage source inverter at the rotor. The simulator is based on RT-LAB real-time simulation platform that allows for easy model-to-real-time-target implementation from Simulink models. The paper puts special emphasis on the problematic of fixed-step simulation of kHz-range PWM inverter drives and the techniques used in the real-time simulator to accurately simulate those drives.

   Steady State And Transient Stability Model Of A STATCOM
By B. Kouadri, Y. Tahir [View]
[Download]

Abstract: Due to the arising liberalization and deregulation of the electric energy market, the demand on AC-transmission system are steadily growing. Therefore, also more sophisticated AC-system controllers are highly needed. This paper is focusing on one of these topologies, the two-levels voltage source inverter (Statcom), which might become an interesting high power circuit for transmission applications. A steady state and transient stability model with GTO thyristors is proposed. Simulations are carried out in a 9 bus, 3 machines AC system. The proposed model is suitable in power system studies that require accurate representation as transient stability, voltage stability …etc.

EPE-PEMC 2004 - Topic 12-8: Modelling and simulation
You are here: EPE Documents > 04 - EPE-PEMC Conference Proceedings > EPE-PEMC 2004 - Conference > EPE-PEMC 2004 - Topic 12: POWER ELECTRONICS IN GENERATION, TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY > EPE-PEMC 2004 - Topic 12-8: Modelling and simulation
	[return to parent folder]

	Analysis Of The Battery Energy Storage Converter Operation By Andrzej Sikorski, Adam Kuzma	[View] [Download]
Abstract: In the paper the battery energy storage system is presented. Needs and conditions of system application is described. 40 kVA power BES system constructed in Power Electronic and Electrical Drive Department laboratory test is discussed. Additional active current filter with hysteresis and delta modulation controllers laboratory investigations are presented.

	Physical Model Of Superconducting Coil In Real Experiment By Tomasz Biskup, C. Buhrer, Boguslaw Grzesik, J. Krijgsman, Jaroslaw Michalak, Szymon Pasko, Mariusz Stepien, Marcin Zygmanowski	[View] [Download]
Abstract: Possibility of realization of physical model of a superconducting coil (PhMSC) is described and analyzed in the paper. A physical model can be used to testing Power Conditioning Systems (PCS) instead of the superconducting coil(SC). As a physical model, a serial connection of coil and controlled voltage source is used. By means of controlling of an additional source resistance and inductance of emulated superconducting coil can be changed. Analysis of physical model, simulation and experimental results are presented in the paper. Results described in the paper are part of CRAFT project -HIPOLITY (5th FP).

	Real-Time Simulation Of Doubly Fed Induction Generator For Wind Turbine Applications By Christian Dufour, Jean Belanger	[View] [Download]
Abstract: This paper describes a real-time simulator of wind turbine generator system suitable for controller design and test. The simulated generator is a grid-connected doubly fed induction machine with vector controlled back-to-back PWM voltage source inverter at the rotor. The simulator is based on RT-LAB real-time simulation platform that allows for easy model-to-real-time-target implementation from Simulink models. The paper puts special emphasis on the problematic of fixed-step simulation of kHz-range PWM inverter drives and the techniques used in the real-time simulator to accurately simulate those drives.

	Steady State And Transient Stability Model Of A STATCOM By B. Kouadri, Y. Tahir	[View] [Download]
Abstract: Due to the arising liberalization and deregulation of the electric energy market, the demand on AC-transmission system are steadily growing. Therefore, also more sophisticated AC-system controllers are highly needed. This paper is focusing on one of these topologies, the two-levels voltage source inverter (Statcom), which might become an interesting high power circuit for transmission applications. A steady state and transient stability model with GTO thyristors is proposed. Simulations are carried out in a 9 bus, 3 machines AC system. The proposed model is suitable in power system studies that require accurate representation as transient stability, voltage stability …etc.