| Abstract |
This paper introduces a 10A 12V single chip digitally-controlled DC/DC converter IC based on the low cost 0.6um BiCD process. This IC includes the digital pulse width modulator (DPWM) module with the dead-time programmability. The average time resolution is 1.22ns at the clock frequency 25MHz on 0.6um process. This resolution is as same as that for the counter-based DPWM with the clock frequency 817 MHz. The chip adopted low impedance metal bump technology for reducing a parasitic interconnection resistance in the power stage. The fabricated chip achieves a low on resistance 9.7mΩ in the 20 V output LDMOS (@drain current = 5A, gate voltage = 5 V). The maximum efficiency is 86.4\% at output current 5A when the input voltage, the output voltage and switching frequency and the dead-time are 12 V, 1.3 V, 780 KHz and 15ns, respectively. The maximum voltage deviation and transient response time are 42 mV and 8us, respectively in step-load (5A to 10A) transient response. |
