| |
Scaling method for a multi-terminal DC experimental test rig
| [View]
[Download]
|
| Author(s) |
Marc CHEAH-MANE |
| Abstract |
This paper demonstrates a scaling method for an experimental test rig to represent the steady state operation of different HVDC transmission systems. The method is based on a parameter conversion between the experimental rig and the HVDC system under study. A virtual resistance is added to the DC cable resistance of the experimental test rig in order to achieve the same steady state operation as the real HVDC system. A droop control correction in the VSCs was used to implement the virtual resistance. A Hardware-in-the-loop set-up formed by laboratory-scale power electronic devices and a Real Time Simulator was used to test this scaling method. Three case studies modelled in PSCAD/EMTDC were used to verify that the results show good agreement. |
| Download |
| Filename: | 0700-epe2015-full-23310634.pdf |
| Filesize: | 1.202 MB |
|
| Type |
Members Only |
| Date |
Last modified 2016-06-08 by System |
| |
 |